Products / Machine
Jaw Crusher
Single-toggle primary crusher at the head of the line. Reduces run-of-mine rock to a size the elevators and the descendicator can handle.
Specification
Every figure, and where it comes from.
Values are taken from the company's own technical specification and cross-checked against its quotations. Where two documents disagree, both readings and the rule applied are stated in the row.
- Size
- 16 in × 9 inQuotations
- Drive
- 20 HPTechnical specification motor table
- Position
- Stage 1 of the 21-stage plant flowProcess flow chart
The drawing
How it is built, and how it moves.
Drawn on the same drafting system as the rest of the set: five stroke weights by role, a 2 px grid, and motion derived from the machine's own kinematics rather than approximated.
How it works
The principle behind the specification.
Single toggle, and what that means for the motion
The swing jaw hangs from an eccentric shaft at the top and is held at the bottom by a toggle plate. The result is that every point on the jaw travels an ellipse — nearly circular at the feed opening, flattening to a thin crescent at the discharge. That vertical component is what pulls material down through the chamber, and it is why a single-toggle machine has a higher throughput than a double-toggle of the same opening.
The toggle as a fuse
The toggle plate is the weakest deliberate link in the machine. Feed something uncrushable and the toggle fails before the frame or the eccentric does — a cheap part instead of an expensive one.
Elsewhere in the line
What sits either side of it.
Machine · Reverse pulse jet
RPJ Bag Filter
Collects the product out of the air stream. Cleaned on line, so the plant does not stop for the filter.
Machine · 300 mm, VFD
Rotary Airlock Valve
Discharges collected powder out of the filter hopper without letting air in. A small machine that decides whether the…
Machine · 400 CFM
Centrifugal Blower
Draws air through the whole circuit — mill, classifier, filter — and out. The air is what carries the product; the…
Ask about the jaw crusher.
Quote requests, spares enquiries and technical questions all reach the same desk. We answer with a specification, not a brochure.