Products / Machine
Dynamic Classifier
The machine that decides how fine the product is. A rotating cage inside a static guide-vane ring, with the cut point set by cage speed.
Specification
Every figure, and where it comes from.
Values are taken from the company's own technical specification and cross-checked against its quotations. Where two documents disagree, both readings and the rule applied are stated in the row.
- Dimension
- 1000 mmTechnical specification item 4
- Quantity
- 1 per millTechnical specification item 4
- Cage speed
- VariableTechnical specification item 4
- Drive type
- BeltTechnical specification item 4
- Drive
- 10 HPMotor table; §4 of the same document says 15 HP — the motor table is corroborated by all eight quotations
- Coupling
- Not applicableTechnical specification item 4
The drawing
How it is built, and how it moves.
Drawn on the same drafting system as the rest of the set: five stroke weights by role, a 2 px grid, and motion derived from the machine's own kinematics rather than approximated.
How it works
The principle behind the specification.
How the cut point works
Material entering the cage meets two forces: drag from the air carrying it inward, and centrifugal force throwing it outward. Fine particles have too little mass for centrifugal force to win, so they pass through the cage and leave as product. Coarse particles are rejected outward and fall back to the mill. Raising the cage speed raises the centrifugal force, so the balance point moves finer.
Why it is called high-efficiency
A static separator's cut is blurred — a lot of fine material is rejected with the coarse and goes round again for nothing. A driven cage sharpens the cut, so less already-finished material re-enters the mill. That is where the energy saving in a closed circuit comes from.
Elsewhere in the line
What sits either side of it.
Machine · DC plant, P36
Descendicator
A beater-type disintegrator between the crusher and the mill. Required when the feed arrives as 30/80 mesh grains.
Plant · P36 · surface modification
Mineral Powder Coating Plant
Ground mineral powder treated with stearic acid so it turns hydrophobic — the difference between a filler that…
Machine · 16 in × 9 in
Jaw Crusher
Single-toggle primary crusher at the head of the line. Reduces run-of-mine rock to a size the elevators and the…
Ask about the dynamic classifier.
Quote requests, spares enquiries and technical questions all reach the same desk. We answer with a specification, not a brochure.