Jaw crusherBucket elevatorHopperDescendicatorBall millDynamic classifierRPJ bag filterRotary airlock valveCentrifugal blowerScrew conveyorMixerCoating plant
Akash Engineering Works Akash Engineering Works Request a Quotation
Request a Quotation

Products  /  Machine

RPJ Bag Filter

Collects the product out of the air stream. Cleaned on line, so the plant does not stop for the filter.

Reverse pulse jetType
On lineCleaning
1 per millQty

Specification

Every figure, and where it comes from.

Values are taken from the company's own technical specification and cross-checked against its quotations. Where two documents disagree, both readings and the rule applied are stated in the row.

Type
Reverse pulse jetTechnical specification item 7
Cleaning
On lineTechnical specification item 7
Air flow
As per standardTechnical specification item 7
Air-to-cloth ratio
As per standardTechnical specification item 7
Quantity
1 per millTechnical specification item 7

The drawing

How it is built, and how it moves.

Drawn on the same drafting system as the rest of the set: five stroke weights by role, a 2 px grid, and motion derived from the machine's own kinematics rather than approximated.

Engineering drawing of the rpj bag filter, animated

How it works

The principle behind the specification.

On-line cleaning

Dust-laden air enters below the tube sheet and passes through caged bags from outside to inside, leaving a cake on the outer surface. A diaphragm valve fires a short blast of compressed air down the inside of a row of bags; the shock sheds the cake, which falls to the hopper. Only one row is off duty at a time, so filtration never stops — that is what 'on line' means and it is why the plant does not need a second filter to switch to.

In the works

The machine itself.

Micronizer plant with its air ducting run overhead and bagged product below

Photographed at the AEW works. Retouched for exposure and white balance; nothing has been restyled or added.

Ask about the rpj bag filter.

Quote requests, spares enquiries and technical questions all reach the same desk. We answer with a specification, not a brochure.