Jaw crusherBucket elevatorHopperDescendicatorBall millDynamic classifierRPJ bag filterRotary airlock valveCentrifugal blowerScrew conveyorMixerCoating plant
Akash Engineering Works Akash Engineering Works Request a Quotation
Request a Quotation

Products  /  Machine

Descendicator

A beater-type disintegrator between the crusher and the mill. Required when the feed arrives as 30/80 mesh grains.

P36 · 36 inSize
3 t/hCapacity
30/20 meshFeed

Specification

Every figure, and where it comes from.

Values are taken from the company's own technical specification and cross-checked against its quotations. Where two documents disagree, both readings and the rule applied are stated in the row.

Size
P36 — 36 inAll three brochures
Capacity
3 tonnes per hour at 30/20 meshAll three brochures
Drive
20 HPTechnical specification motor table
Requirement
Required for 30/80 mesh size particlesTechnical specification, note 2

The drawing

How it is built, and how it moves.

Drawn on the same drafting system as the rest of the set: five stroke weights by role, a 2 px grid, and motion derived from the machine's own kinematics rather than approximated.

Engineering drawing of the descendicator, animated

How it works

The principle behind the specification.

Where it sits and why

Between Elevator-1 and Elevator-2 in the line. A jaw crusher leaves a wide size distribution, and the coarse tail of it grinds slowly and unevenly in a ball mill. The descendicator shatters that tail on impact so the mill receives a narrower, more predictable feed.

How it works

Beaters pinned to rotor discs turn at speed inside a split housing. Feed drops in from the top and is shattered against the wear liner. A screen in the lower half holds material in until it is small enough to pass, and an integrated fan carries the through-screen fines away. The housing is hinged so the upper half opens for a liner or beater change.

In the works

The machine itself.

Descendicator with feed hopper and vertical bucket-elevator casing in red-oxide primer

Photographed at the AEW works. Retouched for exposure and white balance; nothing has been restyled or added.

Ask about the descendicator.

Quote requests, spares enquiries and technical questions all reach the same desk. We answer with a specification, not a brochure.